AN ABERGAVENNY granddad has become the first person in Wales to have his chest wall rebuilt with a 3D printed prosthesis following the removal of a large tumour.

Peter Maggs had three ribs and half his breastbone removed during the day-long operation at Morriston Hospital.

The tumour had grown to around the width of a tennis ball and the procedure left an extensive defect in the 71-year-old’s chest.

Surgeons would traditionally have reconstructed it with a special cement prosthesis. But advances in 3D printing technology allowed the use of a bespoke implant.

It was designed in Morriston and printed in Wales, using titanium to give a much stronger and more stable alternative to the traditional method – and to reduce the surgery time by around two hours.

Mr Maggs developed a lump in his chest which he initially thought was a cyst but was later diagnosed as a sarcoma – a cancer of the soft tissue – in the cartilage of one of his ribs.

Cardiothoracic surgeon Ira Goldsmith said: “It was a very extensive growth that needed to be removed. However, removing it also meant removing part of the breastbone and three ribs.

“That would leave a large defect that could have destabilised the entire chest wall and reconstructing it was going to be a very complex procedure.

“Traditionally the operation would have used a cement prosthesis, prepared at the time of surgery.

“Although it can be fairly substantial it is not a precise fit, and it can move, causing problems such as dislocation."

Using Mr Maggs’ CT scans, Morriston’s biomedical 3D technician Heather Goodrum and maxillofacial laboratory services manager Peter Llewelyn Evans created the bespoke implant.

It was 3D printed in titanium by technology company Renishaw, one of the partners in a collaborative innovation project with Morriston Hospital. This was the first time such an implant has been printed in the UK.

It was originally supposed to have been screwed in. But as the bone was narrow and soft there was a chance it could break so Mr Goldsmith sewed it into place instead.

The implant was then covered with a section of latissimus dorsi muscle, which plastic and sarcoma surgeon Thomas Bragg had earlier harvested from Mr Maggs’ upper back, and the wound was closed.

The entire procedure took eight hours - around two hours quicker than if a cement prosthesis had been used.

Mr Goldsmith said: “We are very pleased with the outcome. The implant is a perfect fit.

“Titanium is very strong and any problems like dislocation are reduced or even eliminated because the implant is anchored securely to the ribs and breastbone.

“It was the first time for this procedure to be carried out in Wales and because of its success we plan to carry it out again in the future."

Mr Maggs added: “I had no idea I had cancer until the doctor told me. I didn’t feel any pain, any discomfort. I thought it was a cyst.

“I’m feeling good now. Mr Goldsmith is a saint to me – and Mr Bragg.”

You can watch a video about this story here